EFILive AutoCal/FlashScan Serial and Auth Code

EFILive FlashScan/AutoCal Serial and Auth Code

For VIN License purchases, you must be running EFILive V8.2.24 software or later to generate valid VIN License Auth Codes.
*TCM flashing does not require an available VIN License for customers running V8.3.1 software or later, and licensed TCMs are no longer displayed. 

1.      Download and install the latest version of EFILive V8 Scan & Tune: https://www.efilive.com/download-efilive 
2.      Connect your FlashScan/AutoCal device to your PC.
3.      Start the EFILive V8 Scan and Tune application.
4.      Click the [F7: Licenses] button in the left-hand pane.
5.      The serial number will be shown in the Serial Number field.
6.      Click the [F3: VINs] button in the left-hand pane.
7.      Click the [Generate Auth Code] button. The Authentication Code will be shown in the Auth Code: field. 
      Note: An Auth Code is not applicable to a Scan Only product, only devices with a Tuning Option license.

8.      If generating the serial and auth-code to place a VIN License order, the number of additional VIN licenses that may be purchased for the device must be greater than zero. Where available license slots equal zero, customers will be unable to generate an Auth Code to order VIN Licenses. VIN License Capacity is:
      8.1.      FlashScan V3 - 600 VIN Licenses.
      8.2.      FlashScan V2 - 221 VIN Licenses.
      8.3.      AutoCal V3 - 600 VIN Licenses, however, the VIN License Slot Count has a default value of 1.  
      8.4.      AutoCal V2 - 221 VIN Licenses, however, the VIN License Slot Count has a default value of 1.  

    • Related Articles

    • EFILive FlashScan/AutoCal VIN License & Activation Codes

      For VIN License purchases, you must be running EFILive V8.2.24 software or later to generate valid VIN License Auth Codes. ​1.   Download and install the latest version of EFILIve V8 Scan & Tune: https://www.efilive.com/download-efilive 2.   Locate ...

    • EFILive FlashScan/AutoCal Data Logging Procedure

      Use this guide to capture, save, and send your datalog to your tuner. Files can also be attached when creating or updating tickets. This will ensure that your requests are handled in the most efficient manner possible. Part 1 – Recording a Datalog ...

    • EFILive FlashScan/AutoCal V3 Data Logging Procedure

      Part 1 – Recording a Datalog 1.      Download and install the latest version of EFILive V8 Scan & Tune: a.     https://www.efilive.com/download-efilive 2.      Configure FlashScan/AutoCal V3 for BBX features if not already set up. If you purchased ...

    • Aisin Transmission Calibration Installation - EFILive

      Aisin Transmission Tuning Upon receiving your PPEI Aisin Transmission Tuning please verify all parts & tools are present before proceeding. If you are missing any parts, please contact the vendor you purchased parts from before proceeding. If you ...

    • 2013 – 2017 Cummins AutoCal Installation & Tuning

      This guide will provide you with information about the power levels available for your vehicle and walk you through the installation process. Follow each step carefully to ensure maximum functionality. Please do not hesitate to create a support ...