1. Go to https://www.hptuners.com/ 

2. From here, select “Downloads” 

3. Select “Download VCM Suite BETA” 

​4. Once downloaded, open the application from your downloads folder and install the program. 

1. Connect your MPVI3 to the truck and key on. If your truck has a push-to-start, press and hold the button until your dashboard is illuminated. 

2. Open VCM Scanner. 

3. Select the blue image of a vehicle below the vehicle and layout options “Connect to Vehicle.” 

4. Once you have done this, select the green power button for “Vehicle Controls & Special Functions” 

5. Select “System” 

6. Select “Replace TCM” and follow as instructed. IF YOU SKIP THESE STEPS, YOU WILL HAVE SHIFTING ISSUES AND HAVE TO COMPLETE THE INSTALLATION PROCESS AGAIN 

 7. Locate the TCM in between the driver’s headlight and the battery underneath the hood. It will be located under a fuse panel. 

8. Press the locking tab on the small fuse panel and remove it from its holding bracket. 

9. Below this you will locate the TCM. Remove the old TCM and replace it with your unlocked TCM. 

10. Select the blue image of a vehicle below the vehicle and layout options “Connect to Vehicle.” 

11. Once you have done this select the green power button for “Vehicle Controls & Special Functions” 

12. Select “System” 

13. Select “Replace TCM” and follow as instructed. 

14. Once completed select the black image of the vehicle labeled “Disconnect from Vehicle” located below Layout. 

​

1. Open VCM Editor 

2. Select the Green arrow pointing upwards labeled “Read Vehicle.” 

3. When the Vehicle Reader window opens, select “READ” 

4. A second window labeled Vehicle Reader will now open. Make sure that the E41 ECM at the top has “DO NOT READ” selected and that T93 has “READ ENTIRE” selected. 

5. Click “READ” 

6. Save the supplied stock file to your computer. 

7. You will now click the RED downward arrow “Write Vehicle.” 

8. The licensing window will appear, select “SHOW LICENSE OPTIONS” 

9. Click “Specific” and proceed with “Ok.” 

10. The Vehicle Writer window will now be open select “CLOSE” 

1. Click “HELP” in the VCM Editor taskbar. 

2. Select “VCM Suite Information” in the drop-down. 

3. Click the blue “I” and allow for the data to populate. 

4. Once you see “Gathering Information Complete” click the “Save Information” just to the left of the blue “I” and save the InfoLog in the same location as the read file. 

1. Email the read file and InfoLog that you just obtained to the current email thread that you have going with PPEI. Make sure that this email contains an order number and or ticket number. 

2. Once you have emailed the read file and Infolog to PPEI, you will need to wait until we reply with the completed tune file. 

1. Download the PPEI TCM tune from your email to your computer. 

2. You must now select the “CLOSE FILE” option above favorites. This icon will look like a folder with a backward arrow. 

3. Select File>Open and open the PPEI TCM Tune. 

4. Select the RED downward arrow “Write Vehicle.” 

5. Click on the drop-down and select “Write Entire.” 

6. Select the “Write” option 

7. YOUR TCM HAS NOW BEEN TUNED, ENJOY!