Retrieving Read Files

Retrieving Read Files

Use this guide to retrieve and send read files to our technical support team. When you have the file, attach it to a new or existing support ticket.

  1. Do NOT connect your AutoCal/V2 until step 2 has been completed and the EFI Live V8 Scan & Tune software has been successfully installed.
  2. Download EFI Live V8 Software and install when the download has completed.
  3. Connect your AutoCal/V2 to computer using the supplied USB cable and wait for the device drivers to install successfully.
  4. Open the EFI Live V8 Scan & Tune software (icon will be located on your Desktop).
  5. On the ‘F3: Data Files’ tab it should have an EFILive folder, Scan folder, Tune folder, and Read folder (just to the right of the multi-colored triangle at the bottom left of the window).
  6. Now click on the ‘Read Folder’.
  7. Out to the right of the Read folder, you will see your read files (if you’ve read out any).
  8. Right click on the read file that you wish to email and select ‘Copy’.
  9. Minimize the window so you see the desktop, and right click on the desktop. Select ‘Paste’.
  10. Attach that read file (on your desktop) to a technical support ticket.

    • Related Articles

    • Retrieving Datalog Files

      Use this guide to retrieve and send datalogs to our technical support team. When you have the file, attach it to a new or existing support ticket. Do NOT connect your AutoCal/V2 until step 2 has been completed and the EFI Live V8 Scan & Tune software ...

    • Flashing .CTZ Formatted Tune Files

      Use these steps to flash your vehicle when you’ve received tune files in the .CTZ format. Prior to flashing, your tune must be loaded onto you AutoCal. Verify that the AutoCal is up-to-date with the current/most recent firmware and configured for the ...

    • Flashing .COZ Formatted Tune Files

      Use these steps to flash your vehicle when you’ve received tune files in the .COZ format. Prior to flashing, your tune must be loaded onto you AutoCal. Verify that the AutoCal is up-to-date with the current/most recent firmware and configured for the ...

    • Updating Device BBX Settings & Configuration Files

      This guide is continued from Updating Device Bootblock & Firmware. Please follow both steps to ensure that your device is up to date. Locate the All Diesel BBX file saved to your desktop and double click it. Click on the F2: Scan tab at the top left ...

    • Loading New/Revised Tunes

      Use the following steps to load new or revised tune files into your EFILive tool. This is necessary before each flash. Save the tune file(s) attached to your order email on your Desktop (files will end with .ctz or .coz). Do NOT connect your ...