General
EFILive FlashScan/AutoCal V3 Data Logging Procedure
Part 1 – Recording a Datalog 1. Download and install the latest version of EFILive V8 Scan & Tune: a. https://www.efilive.com/download-efilive 2. Configure FlashScan/AutoCal V3 for BBX features if not already set up. If you purchased ...
EFILive FlashScan/AutoCal Serial and Auth Code
For VIN License purchases, you must be running EFILive V8.2.24 software or later to generate valid VIN License Auth Codes. *TCM flashing does not require an available VIN License for customers running V8.3.1 software or later, and licensed TCMs are ...
EFILive FlashScan/AutoCal VIN License & Activation Codes
For VIN License purchases, you must be running EFILive V8.2.24 software or later to generate valid VIN License Auth Codes. 1. Download and install the latest version of EFILIve V8 Scan & Tune: https://www.efilive.com/download-efilive 2. Locate ...
Loading New/Revised Tunes
Use the following steps to load new or revised tune files into your EFILive tool. This is necessary before each flash. Save the tune file(s) attached to your order email on your Desktop (files will end with .ctz or .coz). Do NOT connect your ...
Flashing .CTZ Formatted Tune Files
Use these steps to flash your vehicle when you’ve received tune files in the .CTZ format. Prior to flashing, your tune must be loaded onto you AutoCal. Verify that the AutoCal is up-to-date with the current/most recent firmware and configured for the ...
Flashing .COZ Formatted Tune Files
Use these steps to flash your vehicle when you’ve received tune files in the .COZ format. Prior to flashing, your tune must be loaded onto you AutoCal. Verify that the AutoCal is up-to-date with the current/most recent firmware and configured for the ...
Updating Device Bootblock & Firmware
Use the following guide to ensure that your EFILive tool is up to date. This is required before taking any action with your AutoCal/V2. Do NOT connect Autocal/ V2 until step 2 has been completed and EFI Live V8 Scan & Tune program has been ...
EFILive FlashScan/AutoCal Data Logging Procedure
Use this guide to capture, save, and send your datalog to your tuner. Files can also be attached when creating or updating tickets. This will ensure that your requests are handled in the most efficient manner possible. Part 1 – Recording a Datalog ...
Retrieving Read Files
Use this guide to retrieve and send read files to our technical support team. When you have the file, attach it to a new or existing support ticket. Do NOT connect your AutoCal/V2 until step 2 has been completed and the EFI Live V8 Scan & Tune ...
Retrieving Datalog Files
Use this guide to retrieve and send datalogs to our technical support team. When you have the file, attach it to a new or existing support ticket. Do NOT connect your AutoCal/V2 until step 2 has been completed and the EFI Live V8 Scan & Tune software ...
Updating Device BBX Settings & Configuration Files
This guide is continued from Updating Device Bootblock & Firmware. Please follow both steps to ensure that your device is up to date. Locate the All Diesel BBX file saved to your desktop and double click it. Click on the F2: Scan tab at the top left ...